
Stone kitchen worktops and islands
Kitchen worktops, islands, splashbacks and carved sinks in marble, granite, quartz or Dekton, made…
We make tasting counters, bar tops and kitchen worktops for houses, growers and homes in Epernay and the Marne valley, about 1 h 20 from the workshop.

A tasting counter takes more than any kitchen. Bottles go down hard, glasses get knocked over, cloths wipe it all day with whatever spray is nearest. And champagne is acidic, a pH around 3. On polished marble that leaves dull rings where the flutes stand.
Marble is possible if you like a counter that shows its history and get it repolished now and then. Just decide that before you open, not after.
Underground it's around 10 to 12 °C and very damp. Cold stone collects condensation and porous stone draws water up. Use a stone that absorbs little, seal it, and stand it on a ventilated frame. Treat steel supports against rust, a rust stain on white marble is very hard to get out.
We glue a 3 cm strip under the front of a 3 cm top, so it looks 6 cm from the customer side at half the weight. A 3 m granite counter 60 cm deep is still about 150 kg, so supports every 60 to 80 cm, and steel brackets for an overhang past 30 cm.
Not during the harvest. Late winter suits best, before the spring visitors. We can measure during opening hours and fit on a closing day.
See granite, islands, Champagne and Reims, or call +33 7 45 20 76 39.

Kitchen worktops, islands, splashbacks and carved sinks in marble, granite, quartz or Dekton, made…

We make bathroom pieces in marble, onyx, granite and Galala limestone at our workshop in La…

We make marble worktops at our workshop in La Chapelle-Saint-Luc, usually 2 or 3 cm thick, and fit…

Granite takes heat and lemon far better than marble and doesn't fade in the sun. For a gîte or a…

Quartz is crushed natural quartz held in resin. It doesn't absorb anything and never needs…

Dekton, by Cosentino, and large porcelain slabs are fired at very high temperature with no resin…

We make island tops in marble, granite, quartz and Dekton, sometimes with side panels that drop to…

We cut splashbacks in marble, granite, quartz and Dekton at La Chapelle-Saint-Luc, often from the…
Another question? Call the workshop: 07 45 20 76 39
It marks polished marble within minutes. Granite, quartzite and Dekton aren't affected.
A 3 cm strip glued under the front edge of a 3 cm top.
About 150 kg at 60 cm deep and 3 cm thick.
Send your measurements or a photo of the room and we will call you back. The quote costs nothing.