Stone kitchen worktops and islands
Kitchen worktops, islands, splashbacks and carved sinks in marble, granite, quartz or Dekton, made at our workshop at 8 rue…
Everything we make
We are a marble and stone workshop in La Chapelle-Saint-Luc, just west of Troyes. Here is everything we make, with a page for each.
Marble and stone bathrooms
We make bathroom pieces in marble, onyx, granite and Galala limestone at our workshop in La Chapelle-Saint-Luc. Basins, vanity…
Marble kitchen worktops
We make marble worktops at our workshop in La Chapelle-Saint-Luc, usually 2 or 3 cm thick, and fit them ourselves. Before you…
Granite kitchen worktops
Granite takes heat and lemon far better than marble and doesn't fade in the sun. For a gîte or a holiday let, it's the first…
Quartz kitchen worktops
Quartz is crushed natural quartz held in resin. It doesn't absorb anything and never needs sealing. We cut and fit it at our…
Dekton and ceramic worktops
Dekton, by Cosentino, and large porcelain slabs are fired at very high temperature with no resin. They take heat, stains and…
Stone kitchen islands
We make island tops in marble, granite, quartz and Dekton, sometimes with side panels that drop to the floor, the waterfall end.
Stone splashbacks
We cut splashbacks in marble, granite, quartz and Dekton at La Chapelle-Saint-Luc, often from the same slab as the worktop.
Sinks carved from your worktop stone
A stone sink in the same marble, granite or quartz as the worktop, so the bowl and the top look like one piece. We carve them…
Marble basins
We carve marble basins at La Chapelle-Saint-Luc, from a single block or built from stone pieces, to sit on a vanity top, hang on…
Vanity tops
We cut vanity tops in marble, quartz, onyx and Galala at La Chapelle-Saint-Luc, for one or two basins set on top, under the…
Stone shower trays
We cut shower trays in marble, granite or quartzite to the exact size of your shower, with the fall to the drain cut into the…
Marble wall cladding
We clad walls in large slabs of marble, usually 1.5 to 2 cm thick, so the veins run floor to ceiling with only one or two joints.
Marble tables
We cut marble table tops, round, oval or rectangular, for a stone, metal or wooden base. Quite often it's a new top for a base…
Marble staircases
Most of our stair jobs are cladding an existing concrete staircase, each tread and riser cut to measure in 2 to 3 cm stone. We…
Marble fireplaces
We make new marble fire surrounds, shelves and hearths, and we restore old French fireplaces, from our workshop in La…
Stone paving and terraces
We supply and lay natural stone paving, sandstone, limestone, granite or travertine, on terraces and floors around Troyes…
Stone pool coping
Coping is the row of stone round the edge of a pool, with a rounded front over the water. We cut it in travertine, granite and…
Window sills, thresholds and surrounds
We cut stone window sills, door thresholds and window surrounds to measure at La Chapelle-Saint-Luc. An outside sill slopes…
Marble restoration and polishing
We take scratches, acid marks and dullness off marble and granite by grinding with finer and finer diamond abrasives, then…
Engraving and printing on stone
We engrave letters, numbers, logos and patterns into marble, granite and other stone, flat or in relief, and screen print colour…
Resin-bound stone carpet
Stone carpet is small marble or quartz grains, a few millimetres across, mixed with clear resin and trowelled on as one surface…
Slabs and offcuts for sale
We sell marble, granite, quartz and other slabs, and offcuts left from bigger jobs, at 8 rue Joseph Marie Jacquard, La…
Kitchens
Most of our work. Worktops in marble, granite, quartz and Dekton or ceramic, plus islands, splashbacks and sinks carved from the stone. The kitchen page compares the materials.
Bathrooms
Carved marble basins, vanity tops, shower trays and wall cladding, including backlit onyx. See the bathroom page.
Inside the house
- Marble tables, or a stone top for a base you already have.
- Staircases, from cladding concrete stairs to floating onyx steps.
- Fireplaces, new or restored.
Outside
- Paving and terraces in frost-resistant stone.
- Pool coping for straight and curved pools.
- Window sills and surrounds.
- Resin-bound stone carpet.
Restoration, engraving, slabs
Restoration means grinding, honing and polishing marble and granite floors, tops and stairs. Engraving covers house names, plaques and logos. We also sell slabs and offcuts.
Getting started
Send photos and rough sizes on WhatsApp to +33 7 45 20 76 39 or by email to contact@dekorenov.com. Then you come to see slabs, or we come to measure. We template once the units or floor are ready, cut at the workshop, then fit. The quote lists the stone, thickness, edges, cut-outs and fitting line by line.
The workshop is at 8 rue Joseph Marie Jacquard, 10600 La Chapelle-Saint-Luc, open Monday to Saturday. Owners abroad will find practical notes in the guides.
Frequently asked questions
Another question? Call the workshop: 07 45 20 76 39
Where is your workshop?
At 8 rue Joseph Marie Jacquard, 10600 La Chapelle-Saint-Luc, in the western industrial estate next to Troyes.
When are you open?
Monday to Saturday, closed on Sunday. Saturday is 10:00 to 16:30. Weekday hours vary a little, so call first.
How do I ask for a quote from abroad?
Send photos and rough sizes by WhatsApp to +33 7 45 20 76 39, or by email to contact@dekorenov.com.
Which materials do you cut?
Marble, granite, quartz, quartzite, onyx, Dekton, Egyptian Galala limestone, large-format ceramic and Corian.
Free quote
Send your measurements or a photo of the room and we will call you back. The quote costs nothing.